jump to example.com
Currently viewing the tag: "air tool"

Pull the over-sized trigger on Thomas & Betts’ pneumatic cable tie tool to tension, accidentally snap, and trim a cable tie in record time. Using any compressor that can generate 85-100psi of dry, oil-less air, the tool works with their own proprietary Ty-Rap brand cable ties, but it will probably accommodate a range of other ties as long as they are .094 to .184 wide.

Made with an impact-resistant polymer housing and soft over-molded grips, it’s designed to be lightweight and balanced to reduce user fatigue. The tool holds the cut-offs until you eject them so you don’t have to go back and clean up after yourself. It also has two built-in hangers to keep it within reach when you need both hands.

Continue reading »

Tagged with:
 

Driving a few posts by hand with a post driver can be fun, but driving a bunch of posts is too much like hard work. Next time get a little help driving from your air compressor by hooking it up to the Striker TS air operated post driver.

The post driver can drive posts up to 1-3/4″ in diameter using only 2 CFM of oiled air at 80-90 PSI. To use the driver, connect your air hose to the air port in the handle and place the driver over the post. Hold onto the driver with both hands and lift the black handle which lifts the internal weight. Then pull down on the driver with both hands to drop the weight. The driver can produce up to 60 drives a minute.

Continue reading »

Tagged with: