jump to example.com
Currently viewing the category: "Week in Tools"
tm-top5.jpg

It’s been a busy week here at Toolmonger. If you’ve been spending time in the shop — you should! — and you haven’t had a chance to keep up with Toolmonger this week, we suggest you start with these posts, which our readers helped to select:

A Light Saber’s Little Brother
I just replaced my trusty but annoying 3AA Maglite with the incandescent bulb and twist-on lens. I’ve never been too much of a Maglite fan, but it’s hard to argue with the sheer number of them out there. They work, but now there’s a new hotness in my roll cab’s top drawer.

My Current Favorite Beater Knife
I own more than a few pocket knives — not as many as Sean, of course, but I have at least 20, including some really nice ones. But the nice ones aren’t the ones we carry around day-to-day, are they? My daily-carry knife is a total beater, and it’s the one you see pictured above: a 3-1/2″ Winchester.

Eaton M90 Rebuild: Part 3
The next series of steps in rebuilding the Eaton M90 requires some new parts and careful disassembly. An arbor press is a must for this stage. Once the snout’s removed, it needs to be disassembled. There are two bearings, a seal, a spring, and the drive shaft inside, all of which need to be removed without damaging the snout.

Jackass Projects: Porsche 944 S2, Part One
Longtime Toolmongers will remember me mentioning my Porsche project a couple of times on the blog, mostly surrounded by four-letter words and complaints about German engineers’ total disrespect of the auto mechanic and outrageously insane parts prices. But I have some good news to report: it’s running, and I’ve been daily driving it for about six months. Here’s part one of the whole (jackass) story.

Budget Shop Truck Build, Part 5: Engine Teardown
What the hell’s been going on with the Toolmonger Shop Truck Build? Well, for a while, a lot of nothing. You may have noticed that the economy isn’t exactly stellar, and honestly we just didn’t have the dough to mess with it for a while. But we’re off the dime, and the truck’s on the move again.

Help us choose next week’s Top 5!

We’d appreciate your help in choosing next week’s Top 5, which’ll be featured here, elsewhere, and in the podcast as well. While you’re reading TM this week, look out for the “Interesting Post” button at the bottom of the article:

interestingpost1.jpg

When you see an article that piques your interest, click the button once. You’ll return to the same page, but TM’s software’ll score your click for future reference. We’ll check in on the totals before selecting next week’s Top 5.