jump to example.com

In the first post of this series, I chronicled my experiences purchasing, transporting, and assembling Delta’s DP350 bench top drill press. You might want to go back and read it if you haven’t already. In this post I’ll look at the specifications and features of the drill press.

One of the first dimensions to look at when buying a drill press is what is the widest piece of stock the machine can drill into the center of. For some reason, manufacturers use this measurement rather than the more practical distance from the column (or back of the machine) to the center of the chuck. It makes the machine sound twice as big as it really is. So a drill press like the DP350, which claims to be a 12″ drill press, actually measures 6″ from column to center of the chuck.

Another critical factor in choosing a drill press is how deep a hole can you drill with it (quill stroke). Usually the longer the quill stroke the better. Delta claims the DP 350 has a quill stroke of 3-1/4″, but for the life of me I couldn’t get a stroke of any more than about 3-1/8″ no matter how I measured it.  Then I figured it out. They installed a 1/8″ thick rubber ring on the quill, presumably to prevent the depth stop from banging into the head if you let go of the handles. This rubber ring prevents the quill from fully retracting, so if you need that extra 1/8″ of stroke you’ll need to remove it.

Speaking of quill travel, the DP350’s quill lock seems a bit anemic. It has a plastic handle and feels sloppy, like you’re going to strip the threads every time you lock it down. It hasn’t failed to hold the quill in place for me yet, but it doesn’t have the solid feel it probably should.

The DP350 spindle has a Jacobs 33 taper. Delta supplies a vanilla 1/2″ three-jaw chuck that uses a chuck key. The provided key has one of those annoying springs that you have to compress to use the key so you don’t accidentally leave it in the chuck and turn the drill press on. The Jacobs 33 taper is pretty common, so you can always upgrade to a better chuck later.

The depth stop is attached to the quill rather than located on the quill handle. This type of stop is usually more accurate and easier to set. It features a quick adjust nut, so rather than wasting time screwing and unscrewing the stop, you can press the release on the stop nut and slide it into position. You can still spin it up and down like a real nut for fine adjustment. Out of the box, my depth stop was loose on the quill so I fixed it by tightening the bolt that holds it on the quill. Also, the stop nut wasn’t squarely hitting the angle bracket they use for a stop. I think a little shim will fix that nicely.

The built-in lamp is a nice add-on. It can be turned off and on independently of the drill press and can be positioned just about anywhere on the left side and front of the press. At first I had a problem getting it to stay where I put it — the flexible arm seemed loose and the lamp would sag no matter what position I tried. To fix the problem I ended up straightening out the lamp and turning the head counter-clockwise one rotation; this seemed to tighten the flexible arm a bit. After that it stayed exactly where I put it.

To get a better look at the variable-speed mechanism, I pulled the top cover off the drill press by removing the 6 screws. Six rubber pads isolate the cover from the rest of the drill, presumably to reduce any vibrational noise. With the cover off you can see the two variable diameter pulleys. When I replaced the cover, I had trouble threading the screws back in the holes. I then noticed the four corner bolts have machine threads and the middle two have tapping threads.

The 1/3″ HP 120V motor attached to Delta’s variable speed mechanism will drive the chuck from 500 to 3,100 rpm. Interestingly, they only label the most extreme speeds on the speed control dial: 500 RPM and 3,100 RPM.  Some Amazon customers have taken measures into their own hands [What’s This?], but doing so accurately will require some sort of tachometer or stroboscope. As I have not built, bought, or borrowed a way to measure the speed yet, I’ll leave that for a later post.

At 9-1/2″ wide by 9-7/8″ deep, the table actually is a little bit wider than Delta’s stated 8-1/2″: an extra inch for free! The table doesn’t have a flat bottom; rather it has tapered supports, which makes it much harder to clamp things to it. You can crank the table up to 1-1/2″ below the chuck to about 13″, depending on exactly how far the chuck’s jaws are extended. The only way I can think of that Delta got the 14-1/4″ chuck to table capacity is if they measure to the taper. From chuck to base measures 18″.  Again Delta gives you 19″ in their specs.

I loosened the table locking bolt with a 3/4″ hex socket — I should have used a 19mm socket, but I didn’t have one handy. Then I removed the table alignment pin to test how far I could tilt the table. Delta claims you can turn the table from 90° left to 90° right, but in actuality the table spins 360° around the table locking bolt. The scale riveted to the base of the table only reads from 45° left to 45° right. There is a hard-to-see witness mark on the table that you’re supposed to line up with the scale, but given that a) the witness mark is 1/2″ above the scale, and b) unless you spin the table around the column to one side or the other the chuck gets in the direct line of site, I don’t see the scale being very useful.

Finally, let’s get a feel for how big the machine actually is. If you read the specs on the Delta website and look at the drill press you might get a little confused. They seem to confuse the terms height and depth. Naturally you’d think height would refer to how tall the machine stands and depth would be related to how much space you need to clear out in back of the machine to get it to fit on the bench. Delta seems to have these two reversed. Anyway, the press stands 37″ tall and measures 22″ front to back. The machine measures more or less 11″ wide, depending on whether you take the pinion shaft handles into consideration.

All in all, my criticisms are minor. I’m frankly amazed Delta can produce a tool like the DP350 so cheaply, even if it is made overseas. If the drill press would have had the Festool name and the accompanying $600+ price tag, I would have expected everything to work perfectly right out of the box.

If I missed some features you’re interested in, let me know in the comments and I’ll either add them to the last part of the series or respond directly to the comment. The last part (for now) in this series will be my impressions after using the drill press for a while.

Price Update: Recently I received a Rockler flyer in the mail. They’re selling the DP350 for $200 until August 27th, 2010. Rockler’s current online price is $220, whereas Amazon currently lists it as $270. So much for getting better deals online.

Shopmaster DP350 [Delta]
DP350 Explosion [Dewalt ServiceNet]
Shopmaster DP350 [Rockler]
Via Amazon [What’s This?]

Tagged with:

17 Responses to Delta DP350 Drill Press: Features And Specs

  1. Jerry says:

    Oh wait – there was a drill press there? I got derailed by that marble (?) benchtop!
    Thanks for a great review of the DP350. Certainly that 12″ boast is common among the various manufacturers but still……a little shdy in the advertising department.
    The Amazon price is oddly high but I have found that, over the years, they have had a tendency to be a little higher than what I can find locally or elsewhere online. With that thought, I always check the shipping costs as well. Often the same deal is available locally but no shipping – a nice savings and you get to look at the tool before you actually lay out the cash.
    Again, thanks for the very in-depth review and comments.

  2. @Jerry.

    Hmm.. marble counter tops in the shop would be cool, but what you see is just the old laminate counter tops from my kitchen. When the previous owner remodeled the kitchen, he kept all the old cabinets and counter tops.

  3. fred says:

    How do you find the variable speed control on this machine?
    In our pipe / metal fabrication shop we’ve been contemplating a variable speed machine (albeit a somewhat beefier Delta 15-343 3-phase unit) – to supplement our WWII vintage Walker Turner (actually a Delta predecessor company by way of Rockwell) 1100.

  4. DocN says:

    The “throat” spec is hardly a new angle, the manufacturers have been using that method for literally over a century. I’ve seen ads for the old “camelback” lineshaft drills, that not only gave the spec, but described what it meant.

    My 1909 Rockford has a 10″ throat, and ” 20″ Drilling Machine” cast into the arm.


  5. Mitch says:

    I bought Harbor Freight’s equivalent for not much cheaper. The screw clamping the workbase turned out to have PARALLEL threads! Not helical screw threads. How is that possible? Anyway, I wasn’t upset because I have low expectations with HF and cut new threads and everything was fine. If this had happened with Delta, I would have been upset.

    I think this would have been better posted under the HF: Hot or Not thread but how do you find older comments than the 11 listed under “Recent Comments”. I couldn’t find the Hot or Not thread using Search.

  6. Mitch says:

    If I had known this Delta was so cheap, I would have bought this instead.

  7. @fred:

    How do you find the variable speed control on this machine?

    Look up from the work piece, it’s at eye level 🙂

    OK I’m assuming you mean what is my opinion of the variable speed drive after using it for a while. I’m in the process of making a few projects using the drill press which I don’t have time to wrap up until this weekend. Hopefully I’ll get around to the next post next week.

    I do have this to say so far, I end up twiddling with the speed more than I would on multi-speed press because it’s so easy. For example I was cutting some holes with a hole saw and started to burn the wood. So in mid-cut (letting up on the quill handle a bit of course) I was able to slow the speed, something you’d never be able to do without the variable speed.

  8. fred says:

    @ Benjamin Johnson

    Recognizing the fact that the Delta 15-343 that were considering as a capital tool purchase is a different machine – I was still curious about how well its little cousin performed. Some years ago – I had thought to buy a 20-950 for our cabinet shop – but by the time I acted it seemed that Delta had discontinued it. I ended up with a Powermatic. I don’t know if there was anything wrong with the 20-950 but it seemed odd at the time – might just have been a commercial decision.

  9. Brian says:

    Sure, Rockler is $219.99, add $15.95 for shipping and handling, plus $36.00 in special shipping charges and you are at $271.94. So Amazon is a better deal at $241.55, or if you don’t like amazon you can try http://www.toolsforless.com where the price is $234.99 but shipping is only $9.95. With big items like this it is important to pay attention to shipping charges.

  10. Peter Revell says:

    Why is your name mixed in with the the sub title The Web’s first tool blog?
    This formatting error occurs on all pages.

  11. @Peter Revell:

    I don’t see what you are talking about. Can you tell us what web browser and what version you are using?

    Anybody else see this?

  12. Nathan Silver says:

    I am looking for a keyless chuck for this machine do you know what model fits the DP350.

  13. Mike says:

    The DP350 is discontinued and some people are saying it has a lot of breakdowns. What have you experienced since 2010 when you did this review of it (really great review, very detailed, thanks BTW)? Problems with variable speed drive?

    Thanks for any advice.

  14. Jamie c White says:

    Ok I’m a women and don’t know much about these but I found one on my late husband things could someone tell me what it’s selling for

  15. Wayne Clark says:

    4PC Set T-Slot Nut – 1080 steel – Black Oxide Finish – 3/8-16 Threads – for 7/16 Table Slot are needed for the drill table. You can find them on Amazon.

  16. Rick says:

    The chuck keeper screw vanished and I need to know what size the set screw is Delta DP 350, do you have any idea? Thank Rick

Leave a Reply to Benjamen Johnson Cancel reply

Your email address will not be published.