Cut a 2″ knockout in four seconds flat with the Maxis Max Punch. Rather than using hydraulic ratcheting, the Max Punch harnesses the power of your standard cordless drill to pull common punch dies together to quickly and accurately cut knockouts in electrical panels.
Operating the Max Punch is simple. You first drill a pilot hole in the panel box. Then put the draw cup over the Max Punch’s draw stud, insert the draw stud into the pilot hole, and screw the die cutter onto the end of the draw stud. The drill powers the Max Punch to draw the die and cup together.
You’ll pay a little over $500 for the Max Punch alone, a little over $800 for the Max Punch with a set of 1/2″ to 2″ dies, or $1,200 for the entire kit which also includes a step drill bit, 2″ to 4″ dies, and a Maxis conduit layout tool.