jump to example.com
tm-top5.jpg
top5-fiveup-0411.jpg

It’s been a busy week here at Toolmonger. If you’ve been spending time in the shop — you should! — and you haven’t had a chance to keep up with Toolmonger this week, we suggest you start with these posts, which our readers helped to select:

Out On A Limb
This ingenious piece of hardware threads into a tree and it serves as a mounting point in the construction of tree structures. In short, these fasteners are your first stop in building one sweet treehouse. They’re super expensive, but they were designed to hold a bed and breakfast in the trees — no joke.

Preview: Greenlee Battery-Powered Steel Cutter
Ever wish your could break steel in half like Superman? An ETS12 battery-powered bolt cutter from Greenlee will do just that, as long as you’re only looking to cut objects like grade 8 bolts and rebar. The ETS12’s head also spins 360 degrees and will cut 100 times before running out of juice. Safety glasses are recommended — blue spandex is optional.

Drive The Point Home With The FrameMaster
The FrameMaster, a tool similar to a staple gun or a manual brad driver, shoots fasteners out of the top of the tool instead of the front. That may sound odd, but it makes driving the delicate framing points that hold the backing in a custom picture frame much easier.

The Flat Bob
Plumb bobs have been in use since the ancient Egyptians decided to build a few pyramids out back, but Lee Valley adds a modern twist: the Flat Bob’s flat weight slides against a wall instead of rolling like a standard plummet — you know, the weight hanging at the end of the string — and the marking slot lies directly in line with the string so your lines are dead on.

3M’s Roloc Surface-Finishing Kit
After you run out of crazy solutions and pull out all your hair when your angle grinder doesn’t offer the finesse you need for a small, intricate job, you could try 3M’s Roloc drill-mounted grinding/sanding/finishing system. It’s just like your bigger gear, but sized for the annoying jobs like getting into tiny corners.

Help us choose next week’s Top 5!

We’d appreciate your help in choosing next week’s Top 5, which’ll be featured here, elsewhere, and in the podcast as well. While you’re reading TM this week, look out for the “Interesting Post” button at the bottom of the article:

interestingpost1.jpg

When you see an article that piques your interest, click the button once. You’ll return to the same page, but TM’s software’ll score your click for future reference. We’ll check in on the totals before selecting next week’s Top 5.

 

Leave a Reply

Your email address will not be published. Required fields are marked *