jump to example.com
Stainless Steel Ties Coupon

In the most recent email from Harbor Freight, they offer a coupon for $2 off stainless steel cable ties. Since I’m a big fan of cable ties, the stainless steel version really piqued my interest. I tie a lot of my outdoor garden projects together with cable ties, but I have noticed that over a few years they can become brittle. I’m wondering if the stainless steel version fairs any better.

These are Storehouse brand, so I wouldn’t expect the best performance, but I’m wondering in general has anybody used stainless steel cable ties? If so, for what purpose did you use ’em? Let us know in comments.

Stainless Steel Cable Ties [Harbor Freight]


12 Responses to Hot or Not? Stainless Steel Cable Ties

  1. Toolaremia says:

    HOT. For HOT applications. Like holding the “non-stock” exhaust in-place on one of my cars. Beats the heck out of coat hangers or bailing wire. I keep a few in my cars as emergency multipurpose ties. Also good for steering rack boots. They definitely take more weather, sun, heat, and weight than plastic ties. I generally use Panduit, but I bet these cheap Chinese knock-offs are good for 50% of the capacity, which isn’t bad for the price.

  2. Kurt Schwind says:

    NOT. For hot metal pipings I use wire and just snip/twist to length. I’d rather have a bucket-o-plastic ties for $5.

  3. > I’d rather have a bucket-o-plastic ties for $5.

    Clearly, you have fewer and less muscular hippies to restrain than some of us do.

  4. Hot, definitely. They’re impervious to ultraviolet, so they’re useful in outdoor applications where even the black nylon ones wouldn’t fare well. (Any spot with concentrated sun, like northern latitudes where a snow field might reflect additional light onto an exposed tie.) High temperature applications, too, obviously, and locations where abrasion is a concern.

    I’ve also seen packages advertise that they’re stable in nuclear radiation environments, which I guess makes sense. Can’t have your cyclotron experimental target falling apart after a few hours on the beamline, can you?

    Also, they’re conductive. This can be good, if you’re trying to ground a shield. Or it can be bad, if an inductive ring around your feedline wasn’t the desired result. Ground cables, in particular, shouldn’t be “choked” by encirclement with unconnected metal, as it can delay the rise-time of the current pulse during a lightning strike, making the ground less effective.

  5. Toolaremia says:

    Seen that before. Very cool, but too time-consuming. Just stick a metal cable tie on it and move on. 🙂

  6. John says:

    I second Toolaremia’s comment — HOT for HOT applications. We sell them for holding exhaust heat wrap in place. They have, as they say, a thousand other uses too…

    Don’t forget that really heavy-duty crates and pallets (or odd-shaped bundles) are often shipped baled together with steel strap, which is a very similar concept if not exactly the same. Super-strength, more rigid (and professional-looking) than wire, very weather-resistant. What more could you ask for? (Besides being cheap enough to be disposable — but for super-temporary uses, these are generally overkill anyway.)

  7. Simon says:

    regarding zip ties that break from UV – generally the black ones are UV stable while the ‘clear’ ones are not. There are a lot of ‘cheap’ ones on the market now that are really poorly made and tend to slip. Big Box ones are usually crap compared to the ‘installer grade’.

  8. Subvert says:

    Hot in the right situation. They’re cheap and strong as hell. I’d say for the most part, I use a lot of the reusable zip ties, but I like having the metal option available too.

    They’re a bit of a pain (sometimes literally) to use though.

  9. Mike Cope says:

    The ties are cheap. Wait till you see what the price of the tool is required for them.

    You would have to go through a lot of ties to pay for itself.

  10. Hey Ben,

    I have used these ties and they come in very handy. Far superior to the nylon type. I’d say spend the the ten bucks and try it. In some cases you will need the tool, but for lighter duty applications it is the same deal as with nylon ties.

    A neat little trick with these: If you ever want to loosen it after you “accidentally” tied down something… use the “non-buckle” end of another tie and push it through the buckle bridge on the short taper side… if it is not tensioned to tight, the little stainless steel ball will release the open end slides right out…!


  11. Martyn says:

    cable-accessories.com – website needs updating, but these are the best nylon and stainless steel cable ties i’ve used.

Leave a Reply to Nate Bezanson Cancel reply

Your email address will not be published.