jump to example.com

Homier Distributing is offering their Speedway Series 30 amp Plasma cutter for $399.  Here’s the lowdown: It doesn’t have an onboard air compressor, so you’ll need a shop air supply of 3.5 CFM @ 70 PSI minimum to run it.  (Check your compressor’s stats carefully — this is more than most small compressors can handle.)  You’ll also need a 220V/60Hz single phase outlet, rated for (we’d guess) at least 50A.  Homier claims a 30% duty cycle at 30A, and it ships with an air regulator and an extra electrode and nozzle.

I know you get what you pay for, but this is tempting if you’ve already got the necessary auxilliary gear around the shop.

Speedway Series 30 Amp Plasma Cutter [Homier Distributing]
Street Pricing [Froogle]


7 Responses to Dealmonger: A $399 Plasma Cutter

  1. bob giddens says:

    On the speedway plasma cutter ,What is the warranty and where can the tips for the machine be purchased? Also what thickness of material will it cut?
    Thank you.

  2. chris says:

    Im looking for a gun for one of this units.

  3. If your looking for parts on this unit you’ll want to email the Homier Parts and Service Center Directly at partsfeedback@homier.com. They can let you know if they have parts for the unit and where you can get tips if they don’t already have them.

  4. Sorry about that I forgot to tell you about the warranty. The Plasma Cutter (PC30) actually has a 1 year warranty. Of Course that doesn’t count the consumables but it’s a pretty good deal for the money. Basically if your looking for a Plasma cutter that your only going to use here and there like any other do it yourselfer then it;s probably exactly what your looking for.

  5. Bob tomani says:

    Hello I’m looking for directions ,schematics ,or maybe capacitors for my speedway 30 amp plasma cutter . Can this be wired to a double 30 amp breaker or a single 30 amp breaker

  6. Bob tomani says:

    I have Speedway 30 amp plasma cutter, I have it plugged in but won’t come on

  7. Dan Kirk says:

    Great little machine. That was my first and I cut a lot of steel at different thicknesses from1/to1/2″. I bought my supplies from a online retailer They make a good and strong. Forgive tool. Good price.

Leave a Reply to Dan Kirk Cancel reply

Your email address will not be published.