jump to example.com
Currently viewing the tag: "Measuring"

tramadol online pharmacy

Need a quick way to check that your scroll or band saw table is set at the right angle? These plastic Accu-Angle gauges are a fast and easy way to set or verify the angle of the table to the blade.

valium online no prescription

The set of eight gauges measures angles from 0 to 7.5º in 0.5º steps. Each gauge measures two different angles. The whole set will run you $13 before shipping.

buy xanax online cod

Accu-Angle [Woodcraft]
Via Amazon [What’s This?]

buy ambien no rx
Tagged with:
 

Most manufacturers sell adapters so you can use a router or a jigsaw with their saw track, but DeWalt also sells two accessories for their track saws that can both help align the track and be used as a layout tool.

Continue reading »

Tagged with:
 

Extruded aluminum track has become a popular addition on machine tables and fences because of its versatility — a variety of accessories like hold downs, stop blocks, and guides can be attached with simple T-bolts.

Incra takes the track to another level. Their fence system gives you precise and repeatable positioning by eliminating one source of human error: lining up stop blocks with a scale. Rather than depend on your eye, they incorporate a 32TPI rack in their track and stop block for measurement-free positioning.

Continue reading »

Tagged with:
 

Snow is melting, the weather is warmer, and there are probably only a few more snow storms left this winter. That can only mean it’s time to start thinking about getting your lawn and garden ready for spring. To get the best results, you need to know your soil — its pH and what nutrients it’s missing. Usually the best way to do this is send away soil samples, but Luster Leaf kits allow you to test the soil at home with no waiting.

Luster Leaf provides kits for testing the nitrogen, phosphorus, and potassium levels in the soil and the soil pH. To test pH, add soil and water to the fill lines of the test chamber, break open a capsule, and shake the container. Then you just compare the color to the chart printed on the side of the container.

Continue reading »

Tagged with:
 

The Versa-Block from Eagle Jigs has been around for a while, but it’s still a neat solution to pack 16 different precise measurements into one octagon-shaped jig. You’d use it primarily for setting bit and blade heights, but the octagon shape also measures 45º, 90º, and 135º angles.

Continue reading »

Tagged with:
 

Spacing markings equidistantly can be tedious and prone to error; it’s easy to make mistakes calculating the distance between the marks. The Point-2-Point from M-Power makes spacing marks equidistantly almost as easy as pulling out a tape measure.

Just choose how many points you need to mark and stretch the Point-2-Point so that the bracketing uprights line up with the ends of your project. The geometry of the gauge keeps each upright the same distance away from the next, no matter how far it’s stretched. For example, if you need to mark three equally-spaced holes on a board, line up the first upright with one end of the board and the 5th upright with the other end of the board.

Continue reading »

Tagged with:
 

Although not as precise as Incra’s Protractor, Stanley’s Premium Adjustable Quick Square lets you mark angles in degrees and includes several handy scales for framing a roof. The square functions as a saw guide, a bevel for copying angles, and a protractor.

Continue reading »

Tagged with:
 

Incra makes a standard protractor more useful. Rather than trying to mark next to a tiny line on the edge of a protractor, every 5º and every 22.5º they machine long slots for marking lines with a really sharp pencil or a 0.5 mm lead mechanical pencil. For less frequently-used angles they also cut short slots every 1/2º.

Instead of trying to line up the protractor along an edge, you can quickly butt the protractor’s T-bar against the edge of your work piece. When you need to use the protractor in the middle of a piece, the T-bar detaches with two thumb screws. With the T-bar removed, you also have access to a 6″ ruler with marking holes every 1/32″.

Continue reading »

Tagged with:
 

While not quite tool pr0n, Woodpeckers’ red anodized tools machined from aircraft-grade aluminum billet are still very drool-worthy. One of their latest products, their dovetail marking gauges, are no exception.

When making hand-cut dovetails, a marking gauge is handy for laying out consistent pins and tails. Not only does it help you get the correct angle, but it helps you precisely transfer the markings from the face grain to the end grain and vice versa.

The gauges come in three different ratios: 1:6, 1:7, and 1:8. Traditionally you’d use a 1:6 dovetail when joining hardwood and a 1:8 for joining softwood — the 1:7 ratio is a compromise between the two.

Continue reading »

Tagged with:
 

Last month I wrote about a tool called the Size Catcher I found while browsing one of my local hardware stores. Since then I’ve picked one up for $5 at Menards and have played with it for a few weeks. Here are my impressions of the tool:

Construction

I find the snap ring annoying since I hate having tools on my key ring — just what you need, keys dangling from the tool you’re trying to use — eventually I’ll get around to removing it. I have been carrying the tool in my pocket for the last few weeks and have forgotten it was there several times. I’ll take it out of my pocket every time I see a nut or bolt and play the see-if-I-can-guess-what-size-it-is game before I measure it.

Continue reading »

Tagged with: