jump to example.com

We’ve seen every model of Dremel rotary tool and put most of them through the shop to test this or that feature, but we kept coming back to the old Dremel 100 that never failed us. The phaser-shaped Stylus was cool but underpowered; the Volt Max cordless was better but didn’t last long with the jobs we subjected it to. However, Dremel’s new 4200 melds the strengths of old 100 with new features we might actually give the old dog up for — like the ability to swap accessories just by pushing a lever.

tramadol online pharmacy

Essentially the 4200 has the same form factor as the 100 and carries most of the same specs of the 4000: a variable speed motor (5,000–35,000 RPM), larger vents, and electronic feedback that adjusts motor power and speed as needed. The important shift with the 4200 is the EZ Change mechanism (not to be confused with the EZ lock system on the bits). It puts a dual lever lock system tucked into the nose of the barrel for quick accessory change, replacing the collet-and-nut bit retention system the old Dremels have had since time began.

valium online no prescription

The new EZ Change is of course compatible with the rest of Dremel’s bit line, but it also represents a shift in thinking. Standard bits have always been the focus for the rotary tool, mostly because they work well and are awesome for small jobs. But a few years ago, someone up in Mt. Prospect figured out this was a remarkably interesting system to hang attachments on. For a while, the attachment solutions have been fairly clunky since there just wasn’t a good way to strap something to the front end of it. But the EZ Change gives the entire front end a neat, simple solution to affix anything to the power, making the 4200 a great deal more “attachment ready” than its predecessors.

buy xanax online cod

Pricing for the basic kit that comes with the 4200, plus a small assorment of discs and grinding/sanding gear, will run you about $130.

buy ambien no rx

4200 Rotary Tool Press Release [Dremel]
Dremel 4200 Video Announcement [YouTube]
Street Pricing [Google Shopping]


15 Responses to Dremel 4200 with EZ Change

  1. Shell says:

    Personally, I think the EZ lock mechanism is over rated, as eventually Dremel will only make accessories for that system and discontinue the other line of accessories that don’t use that system. Additionally, they are more expensive and even with a higher price tag, the quality isn’t always there either.

    Long gone are the days of Dremel mostly producing most of their accessories in USA, let alone for more reasonable prices as well. But if one can afford the price and needs the product in a commercial setting, I suppose the price is justified.

    • Andrew LB says:

      The Dremel 4200’s EZ-Change system is compatible with ALL Dremel attachments and accessories. The only thing that’s different is the way the bit is locked into the tool. The threaded neck of the tool itself is exactly the same as previous tools, so instead of having to tighten a collet, then tighten the attachment nut (ex: flex-shaft attachment), you just attach it and flick the ez-change lock down. simple.

      • Ryan says:

        Yup, the fact that the EZ-Change system is compatible with everything dremel is one of the main reasons i won’t switch brands. Has saved me quite a bit of money in the past going through various multi-tools!

  2. Tomonthebeach says:

    He Shell, I bought one to replace my dead 1970 model. It uses the same bits as the old Dremel as well as most accessories. Being able to change bits, brushes, wheels, or whatever without reaching for a wrench is heaven. I spent more time searching my cluttered workbench for the little wrenches than I did using the tool. No more.

  3. Industrial Power Tools says:

    Thanks for a very good article.
    Mind checking out our site for more great power tools? Thanks!

  4. Hobby Man says:

    I got a 4200 as a gift and really like it. However it had a stuck brush after about 3 uses. From the on line reviews at Walmart, stuck brushes are fairly common on the 4000 series. Dremel sent me a new 4200 but didn’t seem to want the failed unit back. I took the bad one apart and I think the problem was cutting dust getting into the brush holder and acting like hot glue to stick the brush. The brush moved freely as soon as I cleaned out the holder. There may be a tolerance problem and the brushes are sometimes too lose and let cutting dust get into the holder. I was able to add some 0.004″ thick copper tape to one side of each holder and the brushes were still free to slide. I soldered the copper tape to the brass brush spring contacts. I think the tape will close up the space to keep out dust and also reduce the brush temperature. I’ll have to do a few projects to see if the stuck brush comes back. The replacement 4200 appears to have a different material for the brush holder. The original was black and the replacement is white.

    • Surbhi Sharma says:

      Very true. It is really important to have an enclosed latch or something in the tool if there is any chance that the dust would accumulate after a while and hinder the motion of the brush.

  5. John Rogers says:

    I bought one of these years ago, and they really do work very well!

  6. Matt Woolery says:

    I like the 4200 and the quick change bit is a nice feature. When the bits slip out they can be put back in quickly without tools.
    My only problem is a new 9903 tungsten carbide cutter bit broke right in half in less than ten seconds of use. The top half is laying on my shop floor and the bottom half is trapped inside the convenient quick change head.
    Where to I send the ransom to free the trapped half of my disappointing cutting experience?

    • Danielle Low says:

      I would focus on getting the collet out and the broken shaft should either come out with it, or more likely,slip out of the collet as its being pulled free leaving it loose and you should be able to tip the drenel down so gravity does its thing. The collet needs to be gently shifted so they can be eased out. I would get a new collet in case it has put up a fight and came out the sore loser. Hope that helps if you haven’t solved problem yet.

  7. paul says:

    Do you still sell the Dealmonger: Nut and Bolt Identifier?

    I could not find it on your web site. Can you help me?

    Thank you. Paul

  8. fjallraven jackets online says:

    Thats a very good feedback. Wondering what you think of its implication on society as a whole though? There are times when things like this begin to have global expansion and frustration. Ill be around soon to check out your response.
    fjallraven jackets online http://www.fjallravenonline.cc

  9. prada bags store says:

    I really enjoy the way your page looks. I think it is awesome. If you dont mind me asking, what template is this site? Thank you.
    prada bags store http://www.pradablackfriday.online

  10. Stuart Weitzman 5050 sale says:

    First of all, allow my family appreciate a persons command during this matter. Even though this is certainly brand new , nevertheless soon after registering your site, this intellect has exploded extensively. Allow all of us to take hold of ones rss to help keep in touch with at all probable messages Sincere understand but will pass it on to help admirers and my private are living members
    Stuart Weitzman 5050 sale http://www.stuartweitzmansale.online

  11. birkenstock store says:

    REPLY;The Zune concentrates on being a Portable Media Player. Not a web browser. Not a game machine. Maybe in the future itll do even better in those areas, but for now its a fantastic way to organize and listen to your music and videos, and is without peer in that regard. The iPods strengths are its web browsing and apps. If those sound more compelling, perhaps it is your best choice.
    birkenstock store http://www.birkenstockstore.cc

Leave a Reply to Anonymous Cancel reply

Your email address will not be published. Required fields are marked *