Comments on: Cheap-Ass Tools: Pneumatic Spark Plug Cleaner

By: Kelly G

Kelly G — Sun, 06 Jul 2008 04:19:59 +0000

This is a tool that has great value when needed…but for many it will NEVER be needed.
I am a mechanic. I have 4 parts houses on delivery, and can have any plug delivered in 1 hour at wholesale.

But when I want one, I want it NOW! This cleaner allows you to clean a fouled plug and make it runnable instantly. No finding, buying, and driving or waiting.

The poster who said Platinums dont need it was absolutely incorrect. Platinum plugs WEAR better than old conventionals, they last 60k-100k instead of 20-40k, and they can run larger gaps than old plugs without melting. Thats where the advantage ends. They oil or ash foul just like any other plug, they transfer material, they carbon up and fould or lower gap when the mixture is rich. And since they often stay in an engine 100k or more, the odds of them getting old and staying in there when fuel or oil control parts start wearing out is HIGH. most deposits are not sudden disasters (Fuel injector sticking open, sensor temporarily causing a rich condition). Most foulidng and deposits are caused by SLIGHT problems that add up over time. the deposits stay there and it hardens and becomes impossible to remove by hand. These abrasive cleaners will clean them 90% of the tyme. And on plugs that routinely last 5-7 YEARS, if you have deposits at year 3, and a set of plugs is 50-100 dollars, or you have freezing temps and winter fuels that foul them up once a year even though THE PLUGS are actually fine…it actually becoems wise to cleam good plugs rather than replace them.
With Shipping, the Harbor Freight version is about 5 bucks cheaper to lower 48. Thes cleaners are the same design that has been used worldwide in autos and aircraft for over 75 years. They work, they havent changed, and they are still used by professionals to keep even NEW car sparkplugs clean and efficient and avoid needless replacement. (Like say 8 iridium plugs at 13 bucks each that have 40k miles and the only problem with them is crummy gas that caused them to get deposits young…but they still have OVER half their lyfe left, plus they are OEM plugs which are always better matched and superior performance to any generic aftermarkets that were made to work on many years and brands/applications. Youd be much better off with cleaned OEMs than new Bosch’s or new Champions!)

By: fuzzmanmatt

fuzzmanmatt — Sat, 17 May 2008 02:59:57 +0000

I can see how this MIGHT be useful in a situation like Chris points out, but for most DIYers, it’s $1.78 out the door for a spark plug in a mower. And how many people still have carbed cars? In a modern car with platinum plugs, this is useless. Now, ten years ago I would have snatched it up in a heartbeat.

By: Chris

Chris — Fri, 16 May 2008 12:15:05 +0000

This looks awfully similar to the plug cleaners used for aviation spark plugs. Aviation spark plugs have a terrible fouling problem due to the low (but non-zero) lead content of the gasoline used in piston aircraft, and every shop I’ve been in has a small dedicated sandblasting apparatus for exactly this purpose.

I don’t think any of them used the $10 Harbor Freight version, though

By: tmib_seattle

tmib_seattle — Fri, 16 May 2008 02:25:45 +0000

I agree with Benjamen. Sure, replacing the plug is the way to go a lot of the time, but what if you have a tool or vehicle that regularly fouls plugs? What if you’re trying to tune your carb(s) and have the mixture too rich? You’re going to go through a lot of plugs as you troubleshoot the carb if you’re not just cleaning them as you go.

By: Benjamen Johnson

Benjamen Johnson — Thu, 15 May 2008 21:21:49 +0000

Well, obviously if you only have one plug to clean it’s not probably worth it unless you’re thinking long term, but what about the plugs in the chainsaw, the snowblower, the weed wacker, the leaf blower, that’s just my garage… then there’s the neighbors, the parents, etc…

I don’t think I’d use this on my truck though.

By: Adam R

Adam R — Thu, 15 May 2008 21:13:42 +0000

$10 for the tool or $4 for the spark plug? Tough choice, but I will go with the plug. I don’t have to drive 20 miles to pick it up and I know it will work.